◆ High precision and combination of RTD and Thermocouple (TC) calibration

 ◆ Source and measure 14 types of RTD and resistance

 ◆ Source and measure 11 types of thermocouples (TC)

 ◆ 4W, 3W, and 2W connections for RTD simulation and measurement

 ◆ Current calibration of 4 fixed values (100μA, 250μA, 1mA, and 2mA)

 ◆ ℃ and ℉ selectable

 ◆ Accept wide range of excitation current (0.05mA to 5mA) for RTD simulation

 ◆ Individual Thermocouple cold junction compensation (CJC) for simulation and measurement of thermocouples. CJC can be used to fine tune temperature calibration.

 ◆ Easy 0% and 100% setup and operation

 ◆ Easy 25%▲ (up) and 25▼ (down) for temperature calibration.

 ◆ Individual memory of 0% and 100% setup for different RTD types and thermocouple types

 ◆ Auto step and auto ramp for easy linear calibration

 ◆ Detection of too low or too high excitation current (LO or HI) from the measurement device

 ◆ Warning of exceeding calibrator driving current (IEX)

 ◆ Memory of last setup when power off

 ◆ Easy numerical keypad for input

 ◆ Dot Matrix LCD with backlight

 ◆ Very low power consumption of 30mA with backlight off

 ◆ 15 minutes smart auto-power-off. 15 minutes timer resets itself when any input changes

 ◆ 2 minutes smart auto-backlight-off. 2 minutes timer resets itself when any input changes